Beastpower BMW E39 5 Series Rear Sway Bar Brackets - Red

Beastpower Bracket Specifications:

Designed by a professional using Pro/E CAD software. The same software that is used by Boeing, Rolex, Audi, Dell, Nike, Maytag, Braun, HP and thousands of other companies to create their products.

-Made from 6061 aircraft grade aluminum.

-Made on a CNC machine from a solid block of 1.5"x2"x3" aluminum billet.

-Each bracket is anodized in black or red (select above when ordering).

-The following items are included in the package: 2 brackets, 2 m8x25mm allen socket cap screws, 2 m8 washers, 2 m8 nylock nuts, installation instructions.

-The Beastpower brackets are compatible with the stock OEM and aftermarket rear sway bars that fit the BMW 5-series (e39).

-No drilling required; bolt on design.

-10-year money-back guarantee (against breakage only) - Provided by Beastpower.

Original Brackets:

-The primary issues with the OEM brackets (both the original and the 3 year old modified design) relate to the weak aluminum and imperfect design:

-The OEM bracket is made of relatively weak stamped aluminum.

-The upper lip bends easily due to the aluminum being too weak to support aftermarket rear sway bars. This bending can allow the bracket to pop out of the upper slot.

-The bolt digs into the lower bracket lip, a symptom related to the soft aluminum used in the OEM bracket. This thins the area around the bolt hole, weakens the metal, and thereby speeds-up the process which eventually causes the bracket to break.

Bracket Installation:

• Installation is simple and can be completed in less than 30 minutes. To assist in the installation process, we have compiled a concise set of instructions: (click here for installation instructions provided by Beastpower)